Save Money by Using an Existing, Second-Hand Trailer

Purchase of our bespoke trailer-base is a somewhat expensive option because it requires the additional purchases of suspension units, wheels, mudguards, and a hitch. Together, these are costly items amounting to a large fraction of the construction cost of a ‘Bug. Building a completely new trailer also requires obtaining an IVA.

So, using instead an existing second-hand trailer-base makes for a huge saving. Typically, a retired dinghy-trailer can be obtained for a few tens of pounds and this can make a very satisfactory base.

Where to Buy

Firstly, try local dinghy-sailing clubs, talking to their harbourmaster. It’s common for old scrap dinghies, often with their trailers, to be abandoned in the dinghy-park. The harbourmaster has the job of clearing them from the club grounds and will generally be well-disposed to anyone who offers to simply take them away, possibly in exchange for a few tens of pounds.

Failing that, the usual second-hand websites such as Freecycle, Gumtree, ebay, etc.

Type of Trailer

Typically, a T-form or A-form trailer-base, used for transporting dinghies, is likely to be the most compatible with a pod. Other types of trailer may also be suitable.

10″ wheels are preferred for the better ride they give and for their appearance and longevity. But 8″ wheels are more common and could be used. The hubs are – usually – common to both sizes, so a change of wheel size may be possible.

Dimensions

The following trailer dimensions are critical to accommodate a PhieldBug pod.

Firstly: the gap across the trailer into which the pod must fit. This depends on whether the mudguards already on the trailer itself will be retained, or whether new mudguards will be bolted onto the sides of the pod:

  • If retaining the existing mudguards on the trailer, then the pod requires a gap of at least 1220mm clear between the mudguards and at least 1250mm clear between the sidewalls of the tyres. If the overall width of the completed trailer i.e. to the outside of the mudguards (or the outsides of the hubs if greater) exceeds 1576mm, then additional lights or reflectors may be required, for legality on UK roads.
  • But if bolting new mudguards onto the pod instead, then the pod requires a rather precise gap of more than 1250mm but less than 1270mm between the sidewalls of the tyres. In most cases a modification to the trailer would be needed to achieve this. Dinghy trailers are commonly bolted together, making them quite easy to modify.

Secondly: the length of the trailer.

  • To be compatible with most modern cars, the horizontal distance from the axle to the centre of the ball-hitch should be at least 2100mm. The distance required may be shorter for some cars (for example, a classic Mini requires only 1800mm). Most dinghy trailers will be longer than required, but usually a trailer’s drawbar can easily be reduced to a shorter length.
  • There is no hard-and-fast maximum length of the drawbar. A longer drawbar can be an advantage: it could be used, for example, to mount a cycle rack.

Thirdly: the top surface of the trailer.

  • It must be possible to mount the floor of the pod onto the trailer. This will mean removing any components which stand proud of the axle or the drawbar. On most trailers these fittings can be unbolted without structural implications.

Fourthly: the height of the trailer.

  • The ideal height of the pod’s floor is 350mm from the ground but wide variation should be acceptable. Most dinghy trailer bases will be at around this height.

Structure and Weights

We cannot advise on individual structural suitability of trailers. The following information should be used to judge suitability.

The pod – which will be mounted onto the trailer – weighs approximately 100kg. The trailer clearly needs to be able to safely carry at least this weight on the road. Many common dinghies weigh at least this much, with their trolley and mast etc included, so their trailer-base will have been designed to suit.

The trailer also needs to be able to support, say, 200kg of occupants and their gear when parked.

We would be wary of any trailer-base which has a drawbar made of less than, say, 50mm x 50mm box section with 2.5mm wall thickness. Smaller sections (with thicker walls) might be acceptable.

Brakes

We would advise against selecting a trailer that has brakes, which add complexity and maintenance headaches. A braked trailer would, in any case, usually be designed for a much heavier load.